CAB EOS4 Instructions d'exploitation télécharger pdf (Page 36)

36 36

6 Service Functions

6.3 Save Settings



Access only with storage device dened as Default storage !

With the Save settings function the printer conguration can be saved to a storage device (USB ash drive,

Internal Flash File System). The conguration will be saved as XML le in the folder \MISC of the storage device. The

current date is used as le name YYYYMMDD.XML (e.g. 20130104.XML for a le saved on 01-04-2013).

1. If the printer conguration should be saved to an USB ash drive, select USB Memory as Default Storage

and insert USB ash drive into a USB master interface.

If the printer conguration should be saved on the Internal Flash File System, select IFFS as Default

Storage.

2. Start Ofine menu.

3. Select Service.

If the menu is protected via a PIN a prompt appears in the display. Enter the code number and conrm with OK.

4. Select Save settings.

5. Saving of the conguration data starts. When the entire saving procedure is complete the name of the created le

appears in the display.

6. Conrm with .

The printer returns to the Service menu.

An error message appearing during the saving procedure may be caused by an unreadable medium (e.g. unknown

medium, unformatted USB ash drive)  "9.5.3" on page 44.

6.4 Default Settings

Access only with service key inserted!

With the Default settings function all setup parameters excepting the passwords  page 21 can be reset to the

default values.

1. Insert service key into an USB master interface.

2. Start Ofine menu.

3. Select the Service menu.

4. Select Default setting.

The display shows Set to factory defaults?.

5. Conrm with .

The setup parameters will be reset and printer returns to the Service menu.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Pas de commentaire

CAB EOS4 Instructions d'exploitation Page 36