CAB A8+ Manuel de l'opérateur télécharger pdf (Page 38)

38 cab Produkttechnik GmbH & Co KG

1. Pay attention to the specifications of the material indicated in chapter 1 .

2. When using the printer for the first time or using label media with a different

width, make sure to adjust the printhead support as well as the position of

the label edge sensor.

3. There is a warning label (1) on the ribbon supply hub which will be visible if

the material is getting low. When these warning labels are visible, prepare

to replace the material soon.

4. For media loading the plate (2) must be swung away after opening the

printhead.

After media loading swing back the plate (2) to the print mechanism

before locking the printhead !

It is possible to operate the printer with the plate unlocked, but the print

quality and the media feed could get worse.

5. If you do not use the printer for an extended period of time, lift the printhead

to avoid possible flattening of the print roller.

6. If you want to move or ship the printer to another location, remove the

media and the ribbon from the printer.

7. Media Loading

General Information

Fig. 7a Plate and warning label

7. Media Loading

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 119 120

Pas de commentaire

CAB A8+ Manuel de l'opérateur Page 38