CAB A8+ Manuel de l'opérateur télécharger pdf (Page 48)

48 cab Produkttechnik GmbH & Co KG

Fig. 7l Adjustment of the Transfer Ribbon

In the event that wrinkles appear in the transfer ribbon (1), which cause an

inconsistent print image, the transfer ribbon shield (2) can be adjusted to

remove the wrinkles. The adjustment should be done during the printing

process.

1. The current position is visible on the scale (3).

2. To change the position, rotate the screw (4) using the Allen key (5).

Rotating it in the direction of "+" will tighten the transfer ribbon the inner

edge of the transfer ribbon. Rotating it in the direction of "-" will tighten the

outer edge of the tranfer ribbon.

To eliminate the wrinkles, tighten the side where the wrinkles are

originating.

Adjustment of the Transfer Ribbon

7. Media Loading

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 119 120

Pas de commentaire

CAB A8+ Manuel de l'opérateur Page 48