CAB Apollo 1 Manuel de l'opérateur télécharger pdf (Page 37)

37cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.

7 Adjustments Concerning the Labels

Adjustment of the Label Edge Sensor

2 1

Fig. 7 a Adjustment of the label edge sensor

To accommodate a variety of print jobs, the position of the label edge sensor

(1) can be adjusted at right angles to the path of the paper feed. This setting is

particularly useful if the required labels are either narrow, or have punch holes

or reflective markings, or deviate from the square or rectangular shape.

It is important to ensure that the sensor is positioned in a way that the gaps

between the labels or the markings can be recognized by the photocell. (the

position of the sensor is marked by a notch in the sensor holder)

If using labels with an unconventional shape (i.e. round or curved), the sensor

should be positioned at the front edge of the label.

Adjust the sensor position using the knurled knob (2).

By turning the knob clockwise the sensor moves outwards, and by turning the

knob counter-clockwise the sensor moves inwards.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 138 139

Pas de commentaire

CAB Apollo 1 Manuel de l'opérateur Page 37