CAB Apollo 1 Manuel de l'opérateur télécharger pdf (Page 39)

39cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.

Adjustment of the Transfer Ribbon

Fig. 7 c Adjustment of the transfer ribbon

If creases, lines or black patches appear in the print image resulting in a poor

print quality, this may be caused by wrinkles in the transfer ribbon (1). To

remove the wrinkles, the tension of the ribbon should be made even from the

left to the right by moving the ribbon shield (3) up or down.

1. Loosen the adjustment screws (4).

2. Shift the transfer ribbon shield (3) sideways into the direction of the wrinkle.

Moving it to the left will increase the tension on the left.

Use the scale (2) provided to monitor the adjustments made. If the screw

is in position "1", the tension is highest on the outside, and if it is in position

"5", the tension is highest on the inside.

3. After completing the adjustment, tighten the securing screw (4).

1 2

3 4

1 2

3 44

Apollo 1/2

Apollo 3

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 138 139

Pas de commentaire

CAB Apollo 1 Manuel de l'opérateur Page 39