CAB Apollo 1 Manuel de l'opérateur télécharger pdf (Page 91)

91cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.

The Apollo is delivered with the tear-off plate (5) installed.

Before mounting the cutter, the tear-off plate has to be removed :

1. Switch the printer OFF.

2. Feed the label stock into the Apollo in such a way that the leading edge of

the first label is protruding slightly beyond the printhead (1).

3. Turn the printhead lever (2) counter-clockwise until it stops.

4. Remove the tear-off plate (5) from the guide holes (3).

5. Slide the cutter (4) into the guide holes (3) .

6. Turn the lever (2) clockwise until it stops.

7. Connect the cutter cable (6) to the 15 pin peripheral port on the front of the

Apollo.

8. Switch the printer ON. The cutter will perform a synchronized cutting cycle.

9. Press the key. The printer will feed one blank label forwards which

will be cut off by the cutter. The label stock feed is now synchronized for

the start of the printing process.

Fig. 13 g Electrical connection of the cutter

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 138 139

Pas de commentaire

CAB Apollo 1 Manuel de l'opérateur Page 91